| Customization: | Available |
|---|---|
| Type: | Semi-Trailer |
| Load Capacity: | 30T |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| LPG TANK SEMI TRAILER | |||
| Standard | |||
| GB150-2011<pressure vessels><Movable Pressure vessel safety technology and inspection procedures>JB/T19905-2005 Liquefied gas truck | |||
| Main size | |||
| 1 | Dimensions(l*w*h) | 13000*2500*4000 (mm) | |
| 2 | Estimated Tare Weight | 15000KG | |
| 3 | Payload | 25000KG | |
| 4 | Total Weight | 40000KG | |
| 5 | Effective Volume | 55CBM | |
| Tanker body | |||
| 1 | Products | LPG, Butane, Propane | |
| 2 | Fluid property | flammable | |
| 4 | Design temperature | to 50°C | |
| 5 | Design pressure | 1.61MPa | |
| 6 | Corrosion allowance | 2 mm | |
| 7 | Materials | Tanker body: Q345R, 13mm | |
| End plate: Q345R, HHA2472x8(6.5) mm | |||
| Main Beam: AG700 8mm. | |||
| 8 | Compartment | One | |
| 9 | Manhole | 1Xdn450. | |
| 10 | Shape | Cylindrical; Ellipse head | |
| Detection | |||
| 1 | Heat treatment | Overall heat treatment in a furnace, 600°C to 640°C | |
| 2 | Flaw detection | 100% Flaw detection | |
| 3 | Test pressure | 1.61MPa | |
| 4 | Hydraulic test | 2.1 MPa | |
| 5 | Magnaflux | Aim at welding place flaw detection cannot cover | |
| Running System | |||
| 1 | Axles | 3*FUWA Brand 13 Ton widen 16Ton brake pads | |
| 2 | Suspension system | 6* leaf spring suspension 13*90*10 | |
| 3 | Wheel rim | 12 sets of 9.0*22.5 | |
| 4 | Tyre | 12 sets of 12R22.5 | |
| 5 | Kingpin | 1*2.5"JOST bolt on, in rubbing plate, fabricated | |
| 6 | Landing legs | 1*SAF HOLLAND brand 25T single linkage, double speed | |
| 7 | Air tank | 2x50L | |
| Medium Control System | |||
| 1 | Emergency Cut-off Valves | 4* Gas phase QGJ43F-25-8 | Gas phase DN25, |
| liquid phase QGJ43F-25-7 | Liquid phaseDN50 | ||
| 2 | Ball Valve | 4* Gas phase Q41F-25P-9B | Gas phase DN25, |
| liquid phase Q41F-25P-8B | Liquid phaseDN50 | ||
| 3 | Operating mode | Mechanical | Pull switches |
| 4 | Liquid gauge | ZGM-25-2D (50-2460mm) | |
| 5 | Pressure indicating thermometers | 2* WTQ-280 -50-80ºC | level 1.5 |
| 6 | Oressure gage | 2* YTN-100T 0-4MPa | level 1.6 |
| 7 | Safety Valve | 1*A412F-25-22 DN100 | 1.72MPa |
| 8 | ABS | 1 | |
| 9 | Relay valve | 1 | |
| Electronical System | |||
| 1 | 7-Pin Socket | 1*A412F-25-22 DN100 | |
| 2 | LED Lamp | 1 set | |
| 3 | Cable | 1 set | |
| Accessories | |||
| 1 | 2*Small Tool box | ||
| 2 | Wheel carrier*1 set | ||
| 3 | 2*Fire extinguisher*8kg with red box | ||
| 4 | 2*Cabinet | ||
| 5 | 2*Steel fender | ||
| 6 | 1*Spare tire cranking bar | ||
| 7 | 2*landing gear cranking bar | ||
| 8 | Shaft sleeve head | ||
| 9 | 1* C shape Static conductive belt | ||
| 10 | Completely Impeller blasting | ||
){kind=link}